Seat Ateca 2020, Owner'S Manual

Page: 137 / 376

Seats and headrests
Adjusting the headrests
Fig. 119 Front seat: headrest adjustment.
Fig. 120
Rear headrest: headrest adjustment.
Adjusting the height of the headrests
●
Grab the sides of the headrests with both
hands and push upwards to the desired posi-
tion. To lower it, repeat the same action,
pressing the
1
›››
Fig. 119
›››
Fig. 120 button
on the side.
● The headrest must lock correctly in one po-
sition.
Removing and fitting the headrests
Fig. 121 Rear headrest: removal.
Removing and fitting the front headrests
●
Move the headrest upwards until it arrives
to the top.
●
Press the side button
›››
Fig. 119
1
and re-
move the headrest.
●
To refit, insert the headrest into the holes in
the backrest, pushing it down until it engages.
Removing the rear headrests
To remove the headrest, the corresponding
backrest must be partially folded forward.
●
Unlock the backrest
›››
page 137 .
● Move the headrest upwards until it arrives
to the top.
●
Press button
›››
Fig. 121
1
, while simultane-
ously pressing on the security hole
2
with a
flat screwdriver a maximum of 5 mm wide,
and remove the headrest.
●
Move the backrest until it engages properly
›››
in Folding down and raising the rear
seat backrest on page 138 .
Fitting the rear headrests
To mount the external headrests, the corre-
sponding backrest must be partially folded
forward.
●
Unlock the backrest
›››
page 137 .
●
Insert the headrest bars into the guides until
they perceptibly engage. It should not be
possible to remove the headrest from the
backrest.
●
Move the backrest until it engages properly
›››
in Folding down and raising the rear
seat backrest on page 138 .
WARNING
Remove the rear headrests only when it is
necessary to fit a child seat. After removing
a child seat, refit the headrest immediately.
135