Seat Ateca 2018 Owner'S Manual Download Page 38

Page: 38 / 412

The essentials

Easy Connect

Vehicle

menu settings

Fig. 49

Easy Connect: Main menu.

Fig. 50

Easy Connect: Vehicle Menu.

The actual number of menus available and
the name of the various options will depend
on the vehicle’s electronics and equipment.

●

Switch the ignition on.

●

If the Infotainment System is off, switch it on.

●

Press the Infotainment button



and

then the

Vehicle

function button

›››

Fig. 49

●

OR:

Press the infotainment button



open the

Vehicle

›››

Fig. 50

●

Press the

SETTINGS

function button to open

the

Vehicle settings

menu.

●

To select a function in the menu, press the

desired button.

When the function button check box is activa-
ted



, the function is active.

Pressing the menu button



will always take

you to the last menu used.

Any changes made using the settings menus
are automatically saved on closing those
menus.

Submenu

Possible setting

Description

ESC system

–

Activation and deactivation of the traction control system (ASR) and the elec-
tronic stability control (ESC) system, selecting the Sport / Off-road* mode of the
electronic stability control (ESC Sport)

›››

page 250

Summary of Contents for Ateca 2018





























































































































































































































































































































































































































Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands

Seat Ateca 2018, Owner'S Manual

Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands