manualshive.com logo in svg

Seat Ateca 2018, Owner'S Manual, Page: 313 / 412

Share
Download
Seat Ateca 2018 Owner'S Manual Download Page 313

Driver assistance systems

Park with Park Assist

Fig. 283 

On the instrument panel display: per-

pendicular parking. 

 Finding a parking space.

 Parking position. 

 Manoeuvring.

Fig. 284 

On the instrument panel display: paral-

lel parking. 

 Finding a parking space. 

 Park-

ing position. 

 Manoeuvring.

Key to 

Fig. 283

 and 

Fig. 284

:

Message to move forwards
Your vehicle
Parked vehicle
Parking space detected
Message to park
Message to press the brake pedal
Progress bar

1

2

3

4

5

6

7

Progress bars

The progress bar

››› 

Fig. 283 

7

 and 

››› 

Fig. 284 

7

 on the

screen of the instrument panel displays the
relative distance to be covered. The greater
the distance, the fuller the progress bar.
When driving forward, the content of the pro-
gress bar decreases upwards, and when re-
versing, it decreases downwards.

Necessary conditions to park with Park As-
sist

For parallel parking

spaces

For perpendicular

parking spaces

The traction control system (ASR) must be turned on

››› 

page 252

.

»

311

Summary of Contents for Ateca 2018





























































































































































































































































































































































































































Reviews:

No comments