manualshive.com logo in svg

Seat Ateca 2018, Owner'S Manual

Share
Download
Seat Ateca 2018 Owner'S Manual Download Page 25

The essentials

Front airbags

Fig. 26 

Driver airbag located in steering

wheel.

Fig. 27 

Front passenger airbag located in

dash panel.

The front airbag for the driver is located in the
steering wheel 

››› 

Fig. 26

 and the airbag for

the front passenger is located in the dash
panel 

››› 

Fig. 27

. Airbags are identified by the

word “AIRBAG”.

When the driver and front passenger airbags
are deployed, the covers remain attached to
the steering wheel and dashboard, respec-
tively 

››› 

Fig. 26

 

››› 

Fig. 27

.

In conjunction with the seat belts, the front
airbag system gives the front occupants ad-
ditional protection for the head and chest in

the event of a severe frontal collision 

››› 

 in

Front airbags on page 77

.

Their special design allows the controlled es-
cape of the propellant gas when an occu-
pant puts pressure on the bag. Thus, the
head and chest are protected by the airbag.
After the collision, the airbag deflates suffi-
ciently to allow visibility.

››› 

page 77

23

Summary of Contents for Ateca 2018





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands