Seat Ateca 2018 Owner'S Manual Download Page 198

Page: 198 / 412

Infotainment System

Additional information and display
options

The displays appearing on the screen may
vary depending on the settings, and may dif-
fer from those described here.

The status bar on the screen can display, for
example, the current time and outside tem-
perature.

All displays can be viewed only after com-
pletely restarting the Infotainment system.

Initial configuration wizard

Fig. 195

Initial configuration wizard

The initial configuration wizard will help you
to set up your Infotainment system the first
time you switch it on.

Every time you switch on the Infotainment
system, the initial setup screen will appear

›››

Fig. 195

if any parameters have not been

set or if the

NEVER

function button has not

been pressed.

Function button: function

CLOSE

Closes the Configuration Wizard, and

the main menu or last mode in which

you used the Infotainment system will
appear. The next time you switch on
the system, the Configuration Wizard
will start up again.

NEVER

Disables the possibility of changing

the settings of the Infotainment sys-
tem. If you want to perform the initial

system setup, you must enter via

Sys-

tem setup

and select

Configura-

tion Wizard

START

Starts up the Configuration Wizard.

Press to configure the time and date (if

it has a navigation system it will be
configured automatically with the
GPS).

Press to search and store to memory
the radio stations that have the best
reception at that moment on all avail-
able bands (AM, FM and DAB).

Press to link your mobile telephone to
the Infotainment system.

Press to select your home address us-
ing your current position or by man-

ually entering an address.

Function button: function

PREVIOUS

NEXT

To go to the previous or next parameter
to set.
When a parameter has been set, the
only way to reset it is from the main

menu, clicking on it, and not using the

Previous/Next buttons.
When setting any parameter, a confir-
mation mark will appear on it



FINISH

Once one or more settings have been
applied, click on this in the main menu
of the wizard to confirm and finalize

the settings.
If there are any parameters you have

not set, the next time you connect the
Infotainment system, the Initial Config-

uration Wizard will start up.

Only valid for Navi System and Navi System Plus.

196

Summary of Contents for Ateca 2018





























































































































































































































































































































































































































Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands

Seat Ateca 2018, Owner'S Manual

Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands