Seat Arona 2018, Owner'S Manual

Page: 63 / 372

The essentials
Note
The vehicles must not touch each other,
otherwise electricity could flow as soon as
the positive terminals are connected.
Changing the windscreen
wiper blades
Changing the wiper blades
Fig. 80
Wipers in service position.
Fig. 81
Changing the windscreen wiper blade.
To change the blades it is necessary to move
the wipers from the rest position into the serv-
ice position.
Do not change the windscreen wipers when
out of the service position, as it could cause
paint to flake off the bonnet due to friction
with the windscreen wiper arm.
Service position (for changing wiper
blades)
●
Ensure that the wiper blades are not frozen.
●
Turn the ignition on and off and then (within
approximately 9 seconds) push the wind-
screen wiper lever down (short wipe). The
windscreen wipers will move to the service
position
›››
Fig. 80 .
Removing the wiper blade
●
Lift the windscreen wiper arm.
●
Press the securing tab down
1
›››
Fig. 81 .
● Extract the wiper blade from the wiper arm.
Fitting the wiper blade
●
Insert the wiper blade onto the windscreen
wiper arm until it clicks into place.
●
Place the windscreen wiper arms to their
initial position.
●
Turn the ignition on, push the windscreen
wiper lever down (touch wipe) and then turn
the ignition off.

›››
in Changing the windscreen
and rear window wiper blades on
page 87

›››
page 87
61