Seat Arona 2018, Owner'S Manual

Page: 55 / 372

The essentials
● Keep the air compressor running until it rea-
ches 2.0 to 2.5 bar (29-36 psi/200-250 kPa).
A maximum of 8 minutes .
●
Disconnect the air compressor.
●
If it does not reach the pressure indicated,
unscrew the tyre inflator tube from the valve.
●
Move the vehicle 10m so that the sealant is
distributed throughout the tyre.
●
Screw the compressor tyre inflator into the
valve.
●
Repeat the inflation process.
●
If the indicated pressure still cannot be
reached, the tyre is too badly damaged. Stop
and request assistance from an authorised
technician.
●
Disconnect the air compressor. Unscrew
the tyre inflator tube from the tyre valve.
●
When the tyre pressure is between 2.5 and
2.0 bars, continue driving without exceeding
80 km/h (50 mph).
●
Attach the sticker
›››
Fig. 67
2
to the instru-
ment cluster, within the driver's visual field.
●
Check the pressure again after 10 minutes
›››

page 86 .

›››
in TMS (Tyre Mobility System)*
on page 85

›››
page 85
Changing a wheel
Related video
Fig. 68
Wheels
Vehicle tool kit
Fig. 69 Underneath the floor panel of the lug-
gage compartment: on-board tools.
Adapter for the anti-theft wheel bolts*
Towline anchorage
Box spanner for wheel bolts*
Crank handle for jack
1
2
3
4
Jack*
Hook for extracting the central wheel
trims*
Clip for removing the wheel bolt caps.

›››
in Vehicle tools on page 84

›››
page 84
Central trim for steel rims*
Fig. 70
Correct positioning of the central
wheel trim for steel rims.
The central trims must be removed for access
to the wheel bolts.
»
5
6
7
53