manualshive.com logo in svg

Seat Arona 2018, Owner'S Manual

Share
Download
Seat Arona 2018 Owner'S Manual Download Page 283

Driver assistance systems

Park with Park Assist

Fig. 251 

On the instrument panel display: per-

pendicular parking. 

 Finding a parking space.

 Parking position. 

 Manoeuvring.

Fig. 252 

On the instrument panel display: paral-

lel parking. 

 Finding a parking space. 

 Park-

ing position. 

 Manoeuvring.

Key to 

Fig. 251

 and 

Fig. 252

:

Message to move forwards
Your vehicle
Parked vehicle
Parking space detected
Message to park
Message to press the brake pedal
Progress bar

1

2

3

4

5

6

7

Progress bars

The progress bar

››› 

Fig. 251 

7

 and 

››› 

Fig. 252 

7

 on the

screen of the instrument panel displays the
relative distance to be covered. The greater
the distance, the fuller the progress bar.
When driving forward, the content of the pro-
gress bar decreases upwards, and when re-
versing, it decreases downwards.

Necessary conditions to park with Park As-
sist

For parallel parking

spaces

For perpendicular

parking spaces

The traction control system (ASR) must be turned on

››› 

page 228

.

»

281

Summary of Contents for Arona 2018





















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands