Seat Arona 2018 Owner'S Manual Download

Page: 23 / 372

The essentials

Airbags

Related video

Fig. 21

Vehicle interior

Front airbags

Fig. 22

Driver airbag located in steering

wheel.

Fig. 23

Front passenger airbag located in

dash panel.

The front airbag for the driver is located in the
steering wheel

›››

Fig. 22

and the airbag for

the front passenger is located in the dash
panel

›››

Fig. 23

. Airbags are identified by the

word “AIRBAG”.

When the driver and front passenger airbags
are deployed, the covers remain attached to
the steering wheel and dashboard, respec-
tively

›››

Fig. 22

›››

Fig. 23

In conjunction with the seat belts, the front
airbag system gives the driver and the front
passenger additional protection for the head

Summary of Contents for Arona 2018





















































































































































































































































































































































































Search results

Summary of Contents for Arona 2018

Reviews:

Related manuals for Arona 2018

Brands by name

Popular brands

Seat Arona 2018, Owner'S Manual

Search results

Summary of Contents for Arona 2018

Reviews:

Related manuals for Arona 2018

Brands by name

Popular brands