Seat Arona 2018, Owner'S Manual

Page: 203 / 372

Operating modes
After starting route guidance
Fig. 201
Route calculation.
After starting route guidance, the route to the
first destination will be calculated.
The calculation will be performed in accord-
ance with the data selected in the
Route
options
menu.
After starting route guidance, three alterna-
tive routes will be suggested depending on
the selected setup
›››
Fig. 201 . These 3 routes
correspond to the selectable route options:
Economical , Fast and Short .
Route criteria: Meaning
Blue route : Economical route , the route is calculated
by taking into consideration economic factors.
Red route : Fastest route to the destination, even if it
is necessary to make a deviation.
Route criteria: Meaning
Orange route : Shortest route to the destination,
even if it results in longer travelling time. The route
may have unconventional sections such as secon-
dary roads.
●
Select the desired route by pressing it.
Once the route has been calculated, the sys-
tem gives the first navigation announcement.
Before turning, up to 3 navigation announce-
ments will be heard.
●
Press the adjustment knob
›››
Fig. 173
7
to
listen to the last audible navigation instruc-
tion.
A navigation announcement informs you
when you have reached your “destination”.
A navigation announcement informing you
that you have reached the “destination area”
is given if the exact destination cannot be
reached because it is located in a non-digi-
tised area.
During dynamic route guidance , you re-
ceive information about reported traffic con-
gestion on the route. An additional navigation
announcement is given if the route is recalcu-
lated due to traffic congestion.
During a navigation announcement, you can
change its volume using the button

›››
Fig. 173
6
.
For other adjustments to the navigation rec-
ommendations, select
Navigation > Set-
tings > Navigation announcements
settings.
Note
●
If you miss a turning during route guid-
ance and are currently unable to turn back,
keep on driving until the navigation system
offers a new route.
●
The quality of the navigation recommen-
dations given by the Infotainment system
depends on the navigation data available
and any reported traffic problems.
Route
In the Navigation main menu, press the
Route
function button.
The
Route
function button is only displayed
with route guidance activated.
Function button: function
Stop route guidance
: Aborts current route guidance.
Enter destination
: To enter a new destination or a new
stopover
›››
page 200 .
Congestion ahead
: To exclude a section (of 0.2 to 10
km in length) from the current route, e.g. to avoid
congestion. To cancel the exclusion, press the
Route
function button and then
Cancel congestion
.
»
201