Seat Arona 2018, Owner'S Manual

Page: 160 / 372

Operation
Luggage compartment variable
floor
Fig. 165
Variable boot floor:

raised position;

lowered position.
Fig. 166 Variable boot floor: tilted position.
Variable floor in high position
●
Lift the floor using handle
›››
Fig. 165
1
and pull it back until the front of the floor has
fully passed the supports
2
.
●
Move the floor forward over the supports as
far as the rear seat backrest and then lower
the floor with the handle
1
.
Variable floor in low position
●
Lift the floor using handle
1
and pull it
back until the supports
2
have fully passed
the front part of the floor.
●
Now match the front part with the lower
grooves of the supports and slide the floor
forwards as far as the rear seat backrest and
lower the floor at the same time with the han-
dle
1
.
Variable floor in the tilted position
When the variable floor is tilted you can ac-
cess the spare wheel/anti-puncture kit area.
●
Lift the variable floor in the high position us-
ing handle
1
, pull it up and push it towards
the backrest of the rear seats until the floor
folds along the hinge line and the movable
part of the floor is resting on itself.
●
Rest the floor on its housings
›››
Fig. 166
(arrows).
WARNING
During a sudden driving or braking ma-
noeuvre, or in the event of an accident, ob-
jects could be flung though the interior and
cause serious or fatal injuries.
●
Always secure objects, even when the
luggage compartment floor is properly lif-
ted.
●
Only objects that do not protrude more
than 2/3 the height of the floor may be car-
ried between the rear seat and the raised
luggage compartment floor.
●
Only objects that do not weigh than ap-
proximately 7.5 kg may be carried between
the rear seat and the raised luggage com-
partment floor.
158