Seat Alhambra 2019, Owner'S Manual, Page: 47 / 380

Self-help
● Press the trim against the wheel so that the
valve hole is in the same position as the tyre's
valve
›››
Fig. 46
1
. Make sure that the trim is
correctly fitted all the way around the wheel.
Wheel bolt caps*
Fig. 43 Wheel: wheel nuts with caps.
Removal
●
Fit the plastic clip (vehicle tools
›››
Fig. 39 )
over the cap until it clicks into place
›››
Fig. 43 .
●
Remove the cap with the plastic clip.
The caps protect the wheel nuts and should
be remounted after changing the tyre.
The anti-theft wheel locking bolt has a
special cap. This only fits on anti-theft locking
bolts and is not for use with standard wheel
nuts.
Anti-theft wheel nuts
Fig. 44
Anti-theft wheel bolt with cap and
adapter.
Loosening the anti-theft wheel bolt
●
Remove the wheel cover* or the cap*.
● Insert the special adapter
›››
Fig. 44
1
(ve-
hicle tools
›››
page 40 ) onto the anti-theft
wheel bolt and push it on as far as it will go.
●
Insert the wheel brace (vehicle tools) onto
the adapter as far as it will go.
●
Remove the wheel bolt
›››
page 45 .
Note
Make a note of the code number of the an-
ti-theft wheel bolt and keep it in a safe
place, but not in your vehicle. If you need a
new adapter, you can obtain it from the
SEAT Official Service, indicating the code
number.
Loosening wheel nuts
Fig. 45
Wheel change: loosen the wheel nuts.
Fig. 46
Wheel change: tyre valve
1
and the
correct position for the anti-theft wheel locking
bolt
2
or
3
.
Use only the wheel wrench belonging to the
car to loosen the wheel nuts.
Loosen the wheel nuts only about one turn
before raising the vehicle with the jack.
»
45