Seat Alhambra 2019, Owner'S Manual

Page: 39 / 380

Transporting children safely
● Fold both sides
›››
Fig. 32
B
up in the direc-
tion of the arrow
›››
Fig. 32
2
.
●
Push the cushion
›››
Fig. 32
C
back in the
direction of the arrow
›››
Fig. 32
3
until it en-
gages.
Install the headrest on the child safety
seat
●
Remove the head support and store it safe-
ly in the vehicle
›››
page 131 .
●
Make sure that the seat belt guide is instal-
led in the head support of the seat for chil-
dren on the window side
›››
page 37 .
●
Enter the child seat head support in the
corresponding backrest until it fits correctly
into place
›››
Fig. 33 .
●
Make sure that the rear seats and backr-
ests are correctly locked into place, pulling
on both of them.
Seat belt route with integrated
child seat
Fig. 34 Integrated child seat: fitting the seat
belt.
Fig. 35
Integrated child seat: seat belt route
with guide handle.
Using the guide handle
›››
Fig. 35 , position
the seat belt so that the shoulder part of the
belt lies on the centre of the child's shoulder.
Seat belt guide handle
●
Secure the seat belt guide handle to the
side headrest on the window side. The guide
handle is secured by a button.
●
Open the upper button on the seat belt
guide handle and pass the belt webbing be-
low the side headrest and through the guide
handle.
●
Close the button again.
Adjusting the seat belt
●
Guide the automatic three-point seat belt
below the side headrest.
●
Pull the latch plate and slowly place the
belt webbing across the child's chest and lap.
●
Insert the latch plate into the buckle for the
appropriate seat and push it down until it is
securely locked with an audible click.
●
Pull the belt to ensure that the latch plate is
securely engaged in the buckle.
WARNING
The seat belt only offers maximum protec-
tion from severe or fatal injuries when it is
correctly positioned.
»
37