Seat Alhambra 2019, Owner'S Manual

Page: 113 / 380

Opening and closing
Window controls
Electrically opening and closing
the windows
Fig. 109
Detail of the driver's door: window
controls, as well as electric child lock buttons.
●
Opening the window: press the button

.
●
Closing the window: pull the button

.
Buttons on the driver door
For the front electric windows.
For the sliding door electric windows.
To lock the sliding doors and their win-
dows.
The front and rear electric windows can be
operated by using the controls on the driver
door. The other doors each have a switch for
their own window.
1
2
3
Always close the windows fully if you park the
vehicle or leave it unattended
›››
.
You can use the electric windows for approx.
10 minutes after switching off the ignition if
neither the driver door nor the front passen-
ger door has been opened and the key has
not been removed from the ignition.
Convenience open/close function
The electric windows can be opened or
closed from outside using the vehicle key:
Convenience opening:
●
Press and hold the

button on the remote
control key until all the windows and the sun-
roof* have reached the desired position.
● OR: First unlock the vehicle using the

but-
ton on the remote control key and then keep
the key in the driver door lock until all the win-
dows and the sunroof* have reached the re-
quired position.
Convenience closing:
●
Press and hold button

on the remote
control key until all the windows and the sun-
roof* are closed
›››
.
●
OR: Keep the key in the driver door in the
"lock" position until all the windows and the
sunroof* are closed.
During convenience closing, first the windows
and then the sliding sunroof will be closed.
In the
Settings - comfort
menu, there are
different settings for operating the windows
›››
page 70 .
One-touch opening and closing
The one-touch automatic opening and clos-
ing is used to open or close the windows
completely. It will not be necessary to hold
the button of the corresponding electric win-
dow.
For the automatic raising function: pull the
button for the corresponding window up-
wards until it reaches the second position.
For the automatic lowering function: pull
the button for the corresponding window up-
wards until it reaches the second position.
Stop automatic movement: push or pull on
the button of the corresponding window.
Resetting one-touch opening and closing
The one-touch opening and closing function
is not active after the vehicle battery has
been disconnected or is flat and will have to
be reset.
●
Close all windows and doors.
●
Pull the button of the corresponding win-
dow and hold it for one second in this posi-
tion.
»
111