Seat 2007 Cordoba, Owner'S Manual, Page: 91 / 258

Lights and visibility 89
Safety First Operating instructions Tips and Maintenance Technical Data
Lights and visibility
Lights
Switching lights on and off

Switching on the side lights
– Turn the light switch
⇒
fig. 56 to position

.
Switching on dipped headlights
– Turn the light switch to position

.
Switching off the lights
– Turn the light switch to position 0.
Switching on the fog lights*
– Turn the switch from position

or

to the first stop. The
symbol

in the light switch lights up.
Switching on the rear fog lights (vehicles with front fog lights)
– Turn the switch from position

or

to the second stop
⇒
.
An indicator lamp on the switch itself lights up.
Switching on the rear fog lights (vehicles with no front fog lights)
– Turn the switch from position

or

to the end. An indicator
lamp on the switch itself lights up.
WARNING
Never drive with just the side lights on. Risk of accident. The side lights are
not bright enough to illuminate the road ahead and to ensure that other
road users are able to see you. Always use your dipped headlights if it is
dark or if visibility is poor.
Note
•
The dipped beam headlights will only work with the ignition on. The side
lights come on automatically when the ignition is turned off.
•
If the lights are left on after the key has been taken out of the ignition lock,
a buzzer sounds when the driver door is opened. This is a reminder to switch
off the lights.
Fig. 56 Detailed view of
dash panel lights, fog
light and rear fog light
control