Seat 2007 Cordoba, Owner'S Manual, Page: 221 / 258

If and when 219
Safety First Operating instructions Tips and Maintenance Technical Data
– Remove plastic cover
⇒
page 218, fig. 153 , insert finger in
opening and pull in the direction of the arrow.
– Press the tabs
⇒
page 218, fig. 154 of the lamp holder and
remove lampholder.
– Turn bigger lamp 1/4 turn to left. For the small lamp, rotate and
extract the lamp holder and pull on the lamp.
– Remove lamp and replace.
– Fit the bigger lamp, pressing inwards and turn 1/4 turn to the
right. Place the smaller lamp in casing and press.
– Carefully fit the lampholder in the casing and press until a “clic”
is heard.
– Next replace the cover and press down.
Note
Make sure that when assembling all seals and rubbers are correctly fitted.
Rear lights on frame
Side light 2/ Brake light/ Indicator light
– Open the tailgate.
– Separate the trim from the boot.
– Press the tab
⇒
fig. 155 to release the lamp holder and
remove it.
– Turn bigger lamp 1/4 turn to left. Pull on the small lamp.
– Remove lamp and replace.
– Fit the bigger lamp, pressing inwards and turn 1/4 turn to the
right. Place the smaller lamp in casing and press.
– Position lamp holder towards where the small lamp is housed.
Next press until a “click” is heard
.
A
A
A
B
Fig. 155 Rear lights on
frame
A
A