Seat 2007 Cordoba, Owner'S Manual, Page: 216 / 258

If and when 214
Main beam lights
– Raise the bonnet.
– Remove the loops
⇒
fig. 144 outwards in the direction of the
arrow and remove the cover.
– Remove the lamp cable connector
⇒
fig. 145 .
– Undo the retainer spring and remove.
– Remove the lamp and fit the new lamp in the same position,
making sure it sits correctly.
– Press the retaining spring on the lamp base and clip on.
– Plug in the connection cable.
– Fit the plastic cover and replace the loops
⇒
fig. 144 .
– Check the headlight adjustment. Fig. 144 Main beam lamp
Fig. 145 Main beam lamp
A
2
A
B
A
2