Seat 2007 Cordoba, Owner'S Manual, Page: 201 / 258

If and when 199
Safety First Operating instructions Tips and Maintenance Technical Data
Wheel trims
The wheel trims must be removed to gain access to the wheel
bolts.
Dismantle
– Insert the extraction hook of the tools in the hole for this purpose
⇒
fig. 131 .
– Pull off the hub cap .
Wheel covers*
The wheel covers must be removed for access to the wheel
bolts
Dismantle
– Remove the wheel cover using the wire hook
⇒
fig. 132 .
– Hook this into one of the cut-outs of the wheel cover.
Fit
– Fit the wheel cover onto the wheel rim by pressing it firmly. Put
pressure initially on the point of the cut-out for the valve. Next fit
the rest of the hubcap.
Fig. 131 Changing the
wheel: Removing a hub
cap
Fig. 132 Remove hub
caps