Seat 2005 Toledo, Owner'S Manual

Page: 152 / 309

Heating, Ventilation and Air conditioning 150
Heating, Ventilation and Air conditioning
Heating and ventilation
Controls and equipment
– Using the controls
⇒
fig. 126 and and the control you
can set the temperature, air distribution and the turbine speed.
– To switch a function on or off, press the appropriate button or
. When the function is activated, the display window in the
lower left of the button is lit.
Temperature
With the regulator the heating level is determined. The required tempera-
ture inside the vehicle cannot be lower than the ambient temperature.
Maximum heat output, which is needed to defrost the windows quickly, is
only available when the engine has reached its operating temperature.
Rear window heating

This function will be switched off automatically approximately 20 minutes
after being switched on. It can also be switched off beforehand by pushing
the button
Air recirculation mode

Air recirculation mode prevents strong odours in the outside air from
entering the vehicle interior, for example when passing through a tunnel or in
queuing traffic
⇒
.
Fig. 126 On the dash panel: Heater controls
A
1
A
4
A
5
A
2
A
3
A
1
A
2
A
3