Page 2
2
ATTACH STRETCHERS TO LEG
ASSEMBLIES
Attach Leg Stretchers to Leg As-
semblies using 80mm Hex Lags as
shown. Plug holes with 5/8”
Bungs using Rubber Mallet.
Flip over Base assembly on to Table
Top Assembly. Center Base on Ta-
ble Top. Secure Aluminum Support
Braces to Table top using (12) 3/4”
Phillips Pan Head Screws.
Attach Angle Braces to Table Top
and Cross Stretchers using (8)
1-3/4” Phillips Head Screws.
3
ATTACH BASE ASSEMBLY TO
TABLE TOP ASSEMBLY
5
ATTACH ANGLE BRACES
(271, 272, 273)
Attach Cross Stretchers to Leg
Stretchers using (16) 80mm Hex
Lags. Plug holes with 5/8” Bungs
using Rubber Mallet.
4
ATTACH CROSS STRETCHERS
TO LEG STRETCHERS
(271, 272, 273)
