- 8 -
2.5. Operation of Seashell housing
a. Load the iPhone into the Seashell front housing
2.6. Unloading iPhone from Seashell housing
a. Rinse the Seashell housing with tap water
thoroughly while the iPhone is still inside the
Seashell housing
b. Completely dry the Seashell housing with cloth
or paper towel.
c. Open the Seashell housing by lifting the sliding
knob at the lock.
d. Unload the iPhone from the housing.
e. If the housing is difficult to open, swing the lock
all the way to the rear housing. The tag at the
lock can push against the front housing and
make the housing easier to separate.
b. Turn on and unlock the iPhone before closing
the Seashell housing.
c. Close the housing and check that it is securely
locked.
d. Press the button to activate the camera function
e. Use “still” or “video” buttons as desired.
f. Press home key if camera is not used to
conserve battery charge.
2.7. Water Leakage
a. In case water leak is observed while using the
Seashell housing, stop using it, and remove it
from water as quickly as possible.
b. Failure to do so may cause an electrical or fire
hazard. The iPhone may also be damaged.
c. Immediately wipe with a cloth or tissue paper to
dry off the iPhone and the inside of the housing.
Inspect and apply necessary maintenance.
