8
The Seasafe SSTX/01 transmitter is only recommended for use down to a maximum of 30 metres
underwater and is not guaranteed for use below this depth
.
Rubber Dive-Cap for under water applications
Transmitter with Dive-Cap fitted
8.2
SYSTEM OPERATION
Model: SSTX/DV – SUITABLE FOR DIVING TO 40 METRES
a. Lost-Diver Surface Location
The SSTX/DV has been developed specifically for scuba diving applications. This model transmitter can NOT be used for
Man-Overboard applications and does not make use of “automatic water activation sensors”. The transmitter may only be
manually activated and only once the diver has reached the surface. In the event of a diver surfacing out of sight of the dive
vessel or if a diver is in need of assistance, the transmitter should be manually activated by using the manual ON/OFF
button. In order to activate the transmitter, the button should be pressed twice for approximately half a second each time,
within a five second time-frame. The red flashing LED will indicate that the device is transmitting. Once a diver has been
recovered, the device should be de-activated by holding down the ON/OFF button for approximately one second. The red
LED will flash quickly several times and then cease to flash. At the earliest opportunity, the transmitter should be returned to
an authorised Seasafe dealer for battery replacement.
The rest of the specifications of this device are identical to the Model: SSTX/01 transmitter.
8.
Accessories
a. Dive-Cap
The optional rubber Dive-Cap is for use in underwater applications or in marine activities where it is expected that the
transmitter may be exposed to large volumes of water which may inadvertedly activate the device through the water-
activation sensors. If used with the dive-cap, the transmitter is UNABLE to automatically activate and must be manually
activated. Before use, ensure that the dive-cap is fitted firmly and the correct way round. If it is not fitted correctly, water may
enter the dive-cap and the transmitter will activate.
9.
Copyright
Copyright Seasafe
®
Pty Ltd 2007
International Patents Pending
Specification subject to change without notice
Pull-Ring for quick dive-cap
removal and transmitter
activation under water
Eye for attachment
of lanyard
