2
Contents
Introduction/Warranty ...................................................... 2
Safety ................................................................................. 2
Installation ......................................................................... 3
Service ............................................................................... 4
Performance ...................................................................... 5
Parts ................................................................................... 6
Introduction
Please read our instructions before you install and use your
new pump; this will help you obtain full value and good
service from it. It will also help you avoid needless service
costs that result from causes we cannot control and cannot
cover in our warranty.
NOTICE:
This unit is not designed for applications
involving salt water or brine! Use with salt water or brine
will void warranty.
1. Know the pump application, limitations, and potential
hazards.
Do not use in explosive atmospheres.
Pump water only with this pump. Failure to
follow this warning can result in personal injury
and/or property damage.
2. Disconnect power before servicing.
3. Release all pressure within the system before servicing
any component.
4. Drain water from the system before servicing.
5. Secure the discharge line before starting the pump. An
unsecured discharge line will whip, possibly causing
personal injury and/or property damage.
6. Check hoses for weak or worn condition before each
use, making certain that all connections are secure.
7. Periodically inspect pump and system components.
Per form routine maintenance as required (See
MAIN TENANCE, Page 4).
8. Provide a means of pressure relief for pumps whose
discharge line can be shut-off or obstructed.
9. Personal Safety:
a. Wear safety glasses at all times when working with
pumps.
b. Keep work area clean, uncluttered and properly
lighted – replace all unused tools and equipment.
c. Keep visitors at a safe distance from the work area.
d. Make workshop child-proof – with padlocks, mas ter
switches, and by removing starter keys.
10. When wiring an electrically driven pump, follow elec-
trical and safety codes, as well as the most recent
National Electrical Code.
11.
This equipment is only for use on 115 volt
(single phase) and is equipped with an approved
3-conductor cord and 3-prong, grounding-type
plug.
To reduce the risk of electric shock,
pull plug before servicing. This pump has not
been investigated for use in swimming pool areas.
This pump is supplied with a grounding
conductor and grounding-type attachment plug.
Be certain that it is connected only to a properly
grounded grounding-type receptacle.
Where a 2-prong wall receptacle is encountered,
it must be replaced with a properly grounded
3-prong receptacle installed in accordance with
the National Electrical Code and local codes and
ordinances.
12. All wiring should be performed by a qualified electrician.
13. Make certain that the power source conforms to the
requirements of your equipment.
CRAFTSMAN ONE YEAR FULL WARRANTY
FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or
workmanship. A defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web site: www.craftsman.com
This warranty is void if this product is ever used while providing commercial services or if rented to another
person.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
General Safety Information
