ASSEMB
LY INST
RUCTIONS
MADE IN CHINA
7.5FT MUSICAL TREE
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
SEARS.
Carefully follow the instructions below
on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface.
(See Fig. A)
Fig.B-Tree and Light Assembly
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V~60Hz, 0.16A
Output: 29V-0.28A
Section 3
Section 2
Section 1
Connect the light sets
as arrows shown. If in
opposite direction,the
light sets will not be
same color per section
and you will find one
section is warm white,
another section is
multi-color.
3. Assemble the tree from the bottom to the top. Insert tree bottom pole into tree stand, then screw the 3
4.
Continue by inserting the upper tree section to the lower section until inserting the tree top
.Then connect
each section's light set as Fig B shown. If in opposite direction,the light sets will not be same color per
section and you will find one section is warm white,another section is multi-color.
5. Finally shape the tree by arranging the tips on the branches to give the desired effect. Some tree
styles have “side branches” attached to the main branch stem that require additional shaping as shown
Fig.C
. After shaping the complete tree the finished look should be natural and full.
Fig.C
MODEL #:W-1482-76KHMP
screws.
Fig.A-Tree Stand Assembly
