
7
©
2009
Step 5
Connect the tension control w/wire (7) to the lower tension cable (11).
Connect the extension sensor wire (10) to the sensor w/wire (12).
Insert the handlebar post (4) into the main frame (1). Secure using four curve washers (9)
and four Allen screws (8).
NOTE: Ensure that the wires are safely inserted inside the main frame to avoid pinching the
wires.
Step 6
Connect the upper computer wire (10) in the back of the computer (2).
Slide the Monitor (2) onto the bracket of the handlebar post (4). Secure using two
screws (3).
NOTE: Before attaching the computer to the post, please ensure that the wire is safely
tucked inside the opening of the post. This will ensure that the computer slides on easily
and avoids pinching the wire.
PDF created with pdfFactory trial version
www.pdffactory.com