1 |
P a g e
1. Use the long end of the allen wrench to fasten allen bolts loosely and quickly.
2. Use the short end of the allen wrench for final tightening.
The wood glue is used to secure the wood dowels to various
wood parts during assembly. Please use caution, and follow the
instructions below, when attaching the dowels into the holes:
a. Fill hole with wood glue approx 1/4 full.
b. Slowly push dowel into the hole.
c. Wipe away any excess wood glue.
1. Maximum weight capacity per stool is 250 pounds.
1. Please read the assembly instructions prior to assembling the chair.
2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet.
3. Make sure all bolts are tightly fastened before the chair is used.
4. This chair is not for commercial use.
1
2
1
2
3
!
WARNING:
After a few days of initial assembly and chairs have acclimated
to new environment, retighten all hardware. Periodically check
and retighten the screws every few months.
Please make sure you have all parts before beginning assembly. Please wait until all steps
are completed before tightening bolts.
G E N E R A L I N F O R M AT I O N & T I P S
M A X I M U M R E C O M M E N D E D W E I G H T C A P A C I T Y
A Phillips head
screwdriver is necessary for assembly. It’s not
included in hardware list.