Seanix 42PSEA06, Service Manual

Page: 21 / 83

Page 20 of 83
4
、
Trouble shooting chart
If replace “IMAGE BOARD”, Please re-do “DDC writing” program & “WHITE-BALANCE” & Flash
Update.
If replace PANEL module, Please re-do “white-balance adjust”
4-1 PANEL Trouble shooting
Please reference the “PANEL Service Manual”.
4-2 Turn PDP on and Check:
Plug power cord into pdp set, and the color of LED is red;
If PDP under the normal working, display of LED is blue. Then, the screen show is nor dark. If the color of
LED is red under standby state, you should press the “power” bottom of remote control or you should press
the front standby key. Then, turn PDP TV on.
If it is nothing about OSD or display on screen, service PDP.
The procedure and maintain the step meet as follows:
Power Cable
LED Light