background image

Seamax Inflatable Boat – English User Manual 

 

- 20 -

Pre Operating Check List 

 

1.

 

Check the inflation pressure of the air chambers. Remove any obstruction from the drain valve. 

2.

 

Check the outboard for tightness on the transom. 

3.

 

Know the fuel capacity and cruising range. 

4.

 

Check that the lanyard stop switch for the outboard works correctly. 

5.

 

Be sure the boat is not overloaded. Check the boat capacity plate for weight capacity 

6.

 

Be sure there is an approved personal flotation device of suitable size for each person aboard and 

readily accessible (by law). 

7.

 

Check that the paddles are in the boat in case of engine trouble. 

8.

 

Be sure the operator knows safe navigation, boating and operating procedures. 

9.

 

Have a ring type life buoy or buoyant cushion designed to be thrown to a person in the water. 

10.

 

Arrange the passengers and load in the boat so the weight is distributed evenly and everyone is 

seated properly. 

11.

 

Instruct at least one passenger in the basics of boat handling and the starting and operation of the 

outboard, in case the driver becomes disabled or falls overboard. 

12.

 

Before departing, tell someone where you are going and what time you expect to return. 

13.

 

No alcohol or drugs on board, it is illegal to operate a boat while under the influence of alcohol or 

drugs. 

14.

 

Know the waters and area you will be boating; tides, currents, sand bars, rocks, and other hazards. 

15.

 

Check that all personal safety gear is on board (whistle or noise maker, bailing can, floating rope, 

water proof flashlight)   

16.

 

Ensure the operator has a boating license   

 

 

Towing the Boat

 

If the inflatable boat is to be towed by another boat, the inflatable boat must be empty. Remove outboard, 

fuel tank, and equipment. Attach a line between the towing rings to form a bridle. Attach a towing line to this 

bridle and tow the boat at slow speed.   

 

 

Summary of Contents for Inflatable Boat







































Reviews: