SL-B1250
1250mm Diameter Navigation Buoy
Latest products and information available at
www.sealite.com
7
SL-B1250 Assembly Instructions
Can/
Cone
1
3
5
4
4
2
6
22
13
5 x2
4
3
21
8
7
8
9
13
4
12
5
4
480
19
20 x2
16
4
15
16
14
17
10
480
1150
806
18
11
1006
1
Check Components
• Unload all components from crate or container.
• Check all components are complete and correct. Use assembly diagram on following page for full
list of components.
Assembly
• Fit the mooring post through the float section and secure into place using 4 x M8 x 20 socket head
cap screws, spring washers and flat washers.
• Fit the top section to the float section using 8x M10 x 45mm stainless steel bolts, M10 x 31 flat
washers and M10 spring washers.
• Fit the top mark assembly and lantern to the top section using M8 x 65 (pre-assembled), M8 x 31
OD flat washer, M8 spring washer and M8 nuts.
• Check the light operation. Cover light with a dark jacket or towel and allow 60 seconds for the light
to activate.
• Fit the D shackle to the mooring point.
No Description
Qty
1
SL-B1250 Float (with internal fill)
1
2
SL-B1250 Mooring Post
(standard length shown)
1
3
S/S Socket Head Cap Screw,
Ø8 x 20 (min Grade 70)
4
4
S/S Spring Washer, Ø8
11
5
S/S Penny Washer, Ø8 x 31 OD
14
6
SL-B1250 Cone or Can
(with internal brace)
1
7
S/S Bolt, Ø10 x 45 (min Grade 70)
8
8
S/S Spring Washer, Ø10
8
9
S/S Penny Washer, Ø10 x 31 OD
8
10
IALA Top Mark - St Andrew’s Cross
(post)
1
11
IALA Top Mark - Wreck (post)
1
12
S/S Bolt, Ø10 x 65 (min Grade 70)
pre installed
4
13
S/S Plain Nut, Ø8 (min Grade 70)
7
14
SL-B1250 Top Mark lantern Mount
1
15
S/S Bolt, Ø6 x 40 (min Grade 70)
1
16
S/S Self Locking Nut, Ø6
5
17
IALA Top Mark - St Andrew’s Cross
1
18
IALA Top Mark - Wreck
1
19
S/S Bolt, Ø6 x 16 (min Grade 70)
4
20
S/S Flat Washer, Ø6
8
21
Lantern (SL60 Shown)
1
22
S/S Socket Head Cap Screw,
Ø8 x 25 (min Grade 70)
3
SL-B1250 with IALA Top Mark:
St Andrew’s Cross or Wreck