background image

Latest products and information available at www.sealite.com

4

POSEIDON-1750 Ocean Buoy

Introduction

Congratulations! By choosing to purchase a Sealite Buoy, you have become the 

owner of one of the most advanced rotationally-moulded polyethylene marine buoys 

in the world.

Sealite Pty Ltd has been manufacturing buoys for over 25 years, and particular care has been taken to 

ensure your buoy gives years of service.
As a commitment to producing the highest quality products for our customers, Sealite has been 

independently certified as complying with the requirements of ISO9001:2008 quality management 

system.
By taking a few moments to browse through this booklet, you will become familiar with the versatility of 

your buoy, and be able to maximise its operating function.

Sealite Buoy Division

Sealite marine buoys are manufactured on-site from rotationally-moulded UV-stabilised polyethylene, 

and are designed to offer a low-maintenance, high visibility solution to marine navigation. 
The Sealite buoy division provides turn-key production of navigation buoys. From tooling development, 

raw materials selection, and production, to final testing and inspection, Sealite guarantees superior 

quality and fast turn-around times. 

Sealite’s buoy products are available in a wide range of configurations and sizes, and can be 

economically shipped worldwide.

Why Choose Polyethylene Buoys?

•  No painting 
•  Inhibits growth
•  Increased interval between servicing
•  Routine maintenance on location 
•  Easily repaired in the unlikely event of damage 
•  Lightweight for ease of deployment and maintenance 
•  Environmentally friendly – no use of toxic antifouling paint

4. 

Mooring Requirements & Regulations

Please contact your local authority for any specific requirements regarding the deployment of buoys. 

IALA also has guidelines and recommendations that should be followed. 
All information given in this manual is advisory only. Please consult with your local authority before 

deploying your buoy products.
Local conditions that need to be considered include:-
•  Water depth
•  Maximum currents
•  Maximum wind speeds

•  Sinker size and weight

Summary of Contents for POSEIDON-1750














Reviews:

Related manuals for POSEIDON-1750