background image

YAJ20B.V3     Issue 3(S) - 21/06/17

Original Language Version

© Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Summary of Contents for YAJ20B.V3

Page 1: ...id Use hydraulic jack oil only 9 9 Ensure there are no passengers in the vehicle 9 9 Ensure all non essential persons keep a safe distance whilst the jack is in use DANGER Use the jack for lifting only NOT for supporting the lifted load 9 9 Use suitable capacity axle stands under the vehicle before proceeding with any task 8 8 DO NOT allow untrained persons to operate the jack 8 8 DO NOT operate t...

Page 2: ...se onto the bracket on the side of the handle 6 OPERATION Refer to fig 3 6 1 Preparation before use 6 1 1 You will require an air pressure of at least 100psi max 145psi and an air flow of 9 5cfm to operate jack 6 1 2 Connect the air supply hose 6 2 Eliminate any air in the system 6 2 1 Before using the jack purge the hydraulic circuit in order to eliminate any possible air that may have entered th...

Page 3: ...to the air inlet to prolong air pump life 7 9 After a year of extensive use the oil should be replaced in order to extend the life of your equipment To drain the oil remove the oil filler screw 16 Make sure that no dirt is allowed to enter the hydraulic system s oil See 7 3 for refilling instructions 7 10 Periodically check the piston rod for signs of corrosion Clean exposed areas with a clean oil...

Page 4: ...No Liability is accepted for incorrect use of this product Warranty Guarantee is 12 months from purchase date proof of which is required for any claim ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste All tools accessories and packaging should be sorted taken to a recycling centre and disposed of in a manner which is compatible with the environment When the pr...

Reviews: