6.2.1.
Materials used: Lens PC, Frame PP plastic, Headgear PE plastic.
6.2.2.
The lens is not scratch resistant. Be very careful when wiping, keep this to a minimum and use a soft, non-friction cloth.
6.2.3.
Clean with soap and warm water or with ordinary household disinfectant.
6.3.
INSPECTION
6.3.1.
Faceshields should be periodically inspected and cleaned. If it is damaged , pitted or anything that seriously affects the vision
through it, the lens/faceguard must be replaced.
7. STORAGE
7.1.
Good storage conditions are very important for the service life of face shield. It should be stored at temperatures higher than 5°C
and lower than 40°C and 90% relative humidity. It should be kept away from solvents, solvent vapours or any corrosive materials,
because the protection effect of face shield may be seriously reduced.
7.2.
It is recommended that you put it in a protective bag or box when not in use and store in a safe place.
7.3.
Product life 2 years.
SSP80 Issue 1 19/08/2020
Original Language Version
© Jack Sealey Limited
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on [email protected] or 01284 757505.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
