PAGE 1
InstructIons for:
PROFESSIONAL FOLDING CRANE
MoDEL no:
wF10.
Max. Lift @ min. Jib extension: ......................................... 2020mm
Max. Lift @ max. Jib extension: ........................................ 2340mm
Height (max) of frame: ........................................................ 125mm
Length (max) of frame: ...................................................... 1420mm
Width (max) of frame: ........................................................ 1130mm
overall height: mm ............................................................. 1520mm
Width inside frame (max): ................................................... 970mm
Distance between rear wheel centres: ................................. 300mm
Weight: .................................................................................. 98kg
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, wARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND wITH CARE FOR THE PURPOSE FOR wHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND wILL INVALIDATE THE wARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. GENERAL
1. CONTENTS
section 2. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.2. technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 3. safety/operational Instructions. . . . . . . . . . . . . . . . . . .2.
section 4. Maintenance/Examination/Inspection. . . . . . . . . . . . . .2.
section 5. Assembly and storage. . . . . . . . . . . . . . . . . . . . . . . . . .3.
section 6. owner’s & operator’s responsibilities. . . . . . . . . . . . .3.
section 7. Declaration of conformity. . . . . . . . . . . . . separate file.
section 8. Parts List/Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.
Page No.
2.1
Identification
supplier:
sealey Power Products,
Kempson Way,
suffolk Business Park,
Bury st Edmunds,
suffolk, IP32 7Ar.
Model no: Wf10
2.2 Technical Data
Rated Capacity
safe Working Load (sWL) 10t (tested to 50% overload).
Working Load Limit (WLL) 10t (tested to 50% overload).
Lifting cap. in Position 1: . . . . . . . . . . . . . . 1100kg
Lifting cap. in Position 2: . . . . . . . . . . . . . . 1000kg
Lifting cap. in Position 3: . . . . . . . . . . . . . . 900kg
Lifting cap. in Position 4: . . . . . . . . . . . . . . 800kg
Lifting cap. in Position 5: . . . . . . . . . . . . . . 700kg
Maximum Lift Ht. at Minimum Jib Extn: . . . 2020mm
Maximum Lift Ht. at Maximum Jib Extn:. . . 2340mm
Length of Jib Position 1: . . . . . . . . . . . . . . . 955mm
Length of Jib Position 2: . . . . . . . . . . . . . . . 1060mm
Length of Jib Position 3: . . . . . . . . . . . . . . . 1165mm
Length of Jib Position 4: . . . . . . . . . . . . . . . 1270mm
Length of Jib Position 5: . . . . . . . . . . . . . . . 1375mm
a)
Design capability: test Load 50% overload.
b)
for a description of in-service and out-of-service conditions see
section 3 safety, section 4 Maintenance and section 6.
c)
the crane is fitted with a bypass valve that will prevent the ram
from over extending.
d)
for applications see section 3 safety.
e)
for control system, see fig.1 for release valve and pump handle
assy. usage is explained in section 3.2 operation.
f)
for ground condition requirements, see section 3 safety.
g)
for information on parts and materials requiring specialised
repair techniques see section 4 Maintenance.
1375mm
1270mm
1165mm
1060mm
955mm
1420mm
1100kg Max.
1000kg Max.
900kg Max.
800kg Max.
700kg Max.
2340mm
2260mm
2180mm
2100mm
1130mm
970mm
300mm
2020mm
1520mm
PuMP HAnDLE.
rELEAsE VALVE
fig.1
Original Language Version
Wf10 Issue: 2 - 19/10/09
