6.12.
heavy Spot function (f+p4)
6.12.1.
t
his function is to help identify heavy spots in wheel/tyre and to help evenly balance these spots 180 degrees to each other. Usually
comes into effect when the weight readings are over 100g. This function is rarely used, must be used in conjunction with a tyre
changer. for alloy wheels only.
6.12.2.
f
+P4 – Screen Display – (oPt) – (-1-).
6.12.3.
f
+P4 – Screen Display – (_n) - (h12).
6.12.4.
P
osition tyre valve at 12 o’clock position – Mark tyre with chalk.
6.12.5.
P
ress F4 – Screen Display – (GO) – Remove wheel from balancer at this stage.
6.12.6.
r
emove tyre from rim and re-position it 180 degrees to the tyre valve. Use chalk mark for reference.
6.12.7.
remount wheel on balancer and remove chalk mark from tyre wall.
6.12.8.
lower guard to engage wheel spin.
6.12.9.
A
t the end of spin – Screen display – (_n_) – (h12) will be displayed
6.12.10.
rotate the wheel so that the tyre valve is at the 12 o’clock position and press P4 button.
6.12.11.
s
creen Display – (--1) – (h12)
6.12.12.
manually rotate the wheel until all right imbalance position led’s are lit and mark with chalk in the 12’clock position.
6.12.13.
r
emove the wheel from the machine, re-position the tyre so that the chalk mark is in line with the tyre valve.
6.12.14. Heavy spot function is finished, F+P4 to exit.
6.13.
two operator function
6.13.1.
f
irst operator needs to enter the three wheel dimensions - Distance, Width and Diameter.
6.13.2.
s
econd operator - press F+P6 to activate.
6.13.3.
s
econd operator needs to enter the three wheel dimensions - Distance, Width and Diameter.
6.13.4.
P
ress F+P6 to activate and deactivate second operator when two people are using machine.
6.14.
p1 Key option
(Cal…dis) Stands for “Distance”.
(CAL…Lar) Stands for “Large”. (This is not applicable for this model).
(CAL…diA) Stands for “Diameter”.
(CAL…rET) Stands for “Return”.
6.15.
(fine) reaDinGS below 5 GramS
When you have an imbalance value the machine will round the value up or down to the nearest 5 grams. By pressing the F+P1 the
screen will display the actual imbalance by the gram.
6.15.1.
f
or example if the imbalance readings first shows 5g on left and 15g on right screen display.
6.15.2.
P
ress F+P1 and the screen display will change to the exact imbalance which maybe 3g on left and 17g on right screen display.
7. acceSSorieS
8. maintenance
8.1.
Keep both the wheel balancer and the surrounding area clean and tidy.
WB10 | Issue 1 05/02/18
Original Language Version
© Jack sealey limited
