19
C.
LED Test
The
LED Test
function verifies if the I/M Readiness LED indicator
lamps are functioning properly.
1)
Use the
SCROLL
button to select
LED Test
from the
Tool
Self-test
menu, and then press the
ENTER/Exit
button.
2)
In the
LED Self-test
menu, use the
SCROLL
button to select
one or more LED lamps to check. The LED should turn on or
off according to the selected commands.
Figure 3.10
3)
When completed, press the
ENTER/Exit
button to exit.
Update Mode
This function allows you to update the
code reader
software and
DT
C l
ibrary through a computer.
To update your
code reader
, you need the following items.
The Code Reader VS8801
A PC or laptop with USB ports
A USB cable
1)
Download the programs to be updated to your computer.
2)
Run the MaxiLink Tool Kit in your computer. (Figure 3.11)
3)
Connect the
code reader
to your computer through the USB cable
provided.
LED Self-test 1/4
RED LED ON
YELLOW LED ON
GREEN LED ON
Previous Menu
