3. OPERATION
Compatible with latest Fault Tolerant CAN vehicles.
CAN BUS Fault indicator.
The new FIAT service reset tool has been designed to extinguish service lights for the latest FIAT Fault Tolerant CAN vehicles.
In addition to service reset, the tool has been designed to display a warning lamp when a fault on the CAN bus is present, thus serving as a useful
diagnostic aid for all vehicle systems.
Service Reset Type 1
– Will reset the service dependent on the service schedule for vehicles labelled Type 1.
Service Reset Type 2
– Will reset the service dependent on the service schedule for vehicles labelled Type 2.
Oil Light Reset
– Resets the Oil Degradation indicator. Only on models with Diesel Particulate Filter (DPF).
The
’CAN FAULT’
LED will flash on initial power up of the SLR tool if a CAN Bus fault is present.
●
○
○
Service Reset Type 1
○
●
○
Service Reset Type 2
○
○
●
Oil Degradation Reset (DPF only)
Vehicle Set-Up.
1.
Connect to vehicle.
2.
Switch ignition on.
3.
Press mode button to select correct reset type.
4.
Press the ‘
OK
’ button to perform reset.
Service LED.
Mode Selection.
Fault Tolerant CAN
LED
.
OK Button: Resets The
Service Light.
Mode Selection:
For Selecting
Different Reset
Types.
1.
Press the ‘
OK
’ button to reset
the appropriate service light.
The function LED’s will flash
to indicate a successful reset.
2.
If the reset is unsuccessful
all three service LED’s will
flash.
1.
The CAN FAULT LED will
flash on the initial power up
of the SLR tool if a CAN bus
fault is present.
(Only applicable for the
vehicles as listed in the
application table).
CAN bus Fault
Vehicle Set-Up
1.
Connect to vehicle.
2.
Switch ignition on.
3.
Press mode button to select correct reset type.
4.
Press the
‘OK’
button to perform reset.
VS8623 Issue: 2(I) - 21/11/14
Original Language Version
© Jack Sealey Limited
