NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
3.1.
Remove shock absorber from motorcycle according to procedures recommended in the
manufacturer’s manual.
3.1.1. Place the VS1824 body into position engaging the jaws on the spring as far apart as possible as shown in
fig.1.
3.1 2. Ensure that the jaws are correctly aligned, making sure the two arms are parallel to each other.
3.1.3. Tighten compressors by turning the two
17mm hex adjuster bolts clockwise using a suitable
ratchet wrench. The coil will need to be compressed equally on each side - alternate between each arm
so as not to unbalance the spring. Compress the spring without allowing it to become coil bound.
3.1.4. When spring is compressed enough to rotate on the strut remove top plate from strut, then withdraw the
spring.
CAUTION:
To remove the spring from the compressors turn the two 17mm hex adjuster bolts anti-clockwise,
alternate between each arm so as not to unbalance the spring.
DO NOT
attempt to remove the spring from the
compressors until all tension has been removed.
3.1.5. Reverse above procedure to replace spring.
4.1.
Before each use check the spring
compressor to ensure it is not damaged
or worn. If suspect do not use the unit,
but contact your local Sealey Dealer
who will be able to advise you regarding
repair kits and spare parts.
4.2.
Keep the spring compressor's force
screws lubricated.
4.3.
Keep the spring compressor clean, and
when not in use store in a safe, dry,
childproof location.
4. MAINTENANCE
3. INSTRUCTIONS
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
fig.1