instructions for
combustion leak detector
model no:
Vs0062
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. saFetY
WarninG!
ensure that Health & safety, local Authority regulations and general workshop practice regulations are adhered to
when using tools.
8
do not
use leak detector if damaged.
9
maintain leak detector to ensure that it is in an adequate condition for safe use and optimum performance.
8
do not
attempt to start or move a vehicle whilst in gear.
9
Wear suitable clothing to avoid snagging.
8
do not
wear jewellery. tie back long hair.
9
Account for all tools, parts and components being used.
8
do not
leave tools in or near the engine. return tools to suitable storage after use.
9
When not in use, store in a safe dry and childproof place.
2. introduction
diagnose blown gaskets, cracked blocks and cylinder heads easily and quickly. checks levels of co
2
in cooling system and indicates its
presence by test fluid colour change. use with cone adaptor or in conjunction with radiator caps from model no’s Vs001,Vs0011,Vs0033 and
Vs006. for test fluid refill order model no. Vs0061f.
3. contents
storage Bottle
rubber Bulb
Acrylic test
chamber co2 test liquid
Vs0061f
cone Adapter
Vs0062 | issue:1 05/05/16
Original Language Version
© Jack sealey limited
refer to
instruction
manual
Wear eye
protection
Wear
protective
clothing
Wear
protective
Gloves
