NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
© Jack Sealey Limited
VS0052 Issue:3(I) - 05/11/15
8.1.
Keep unit clean. Protect eye lens, display lid and prism to prevent scratching.
8.2.
For best results an ambient temperature of 20°C for both refractometer and fluid being tested is recommended.
8.3.
To test instrument accuracy, place distilled water on the prism and check that the LIGHT-DARK dividing line is
level with the “WATERLINE”. If the reading is incorrect remove the black rubber cover from the calibration point
(6). Insert the small supplied screwdriver into the hole in the calibration point. Turn the screwdriver whilst
looking through the eyepiece until the waterline mark is on the light-dark dividing line.
8.4.
After use and cleaning store in supplied foam lined and plastic case.
7.1.
Read the test procedure.
7.2.
Refer to
Scale D
which
Indicates the percentage of urea to distilled water in AdBlu;
32.5
indicates the most
desirable percentage of urea in the solution.
4. ANTIFREEZE TEST
4.1.
Read the test procedure.
4.2.
For Propylene Glycol read the
left side of
Scale
A
. For Ethylene, OAT and G13 read the
right side of
Scale A
.
5. WINDSCREEN WASHER
5.1.
Read the test procedure
5.2.
Refer to
Scale B
. Note: Variations in formulation of windscreen washer fluids may result in an average value
for a variety of alcohol based anti-freeze mixtures, this test is therefore a guideline only.
6. BATTERY FLUID TEST
6.1.
Read the test procedure.
6.2.
Refer to
Scale C
which Indicates the density of the battery fluid in kg per litre and the ranges for
Recharge,
Fair
and
Good.
7. ADBLU TEST
8. MAINTENANCE / CALIBRATION
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
