instructions for
Vehicle moVing dolly - 2 Post 900kg max
load
model no:
Vmd001
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
9
ensure the trolley is in sound condition and good working order. take action for immediate repair or replacement of damaged parts. use
genuine parts only. the use of improper parts may be dangerous and will invalidate the warranty.
WaRning!
Prepare the vehicle ready for resting and moving on the trolley. ensure the vehicle will not move, tip, fall etc once it has been
seated on the trolley. take any necessary precautions to protect persons, property and equipment when using this trolley.
9
locate the trolley in a suitable, well lit working area.
9
Keep working area clean and tidy and free from unrelated materials.
9
use trolley on level and solid ground, preferably concrete. Avoid tarmacadam as trolley may sink in.
9
ensure the vehicle engine is switched off .
9
ensure there are no passengers in the vehicle.
9
ensure all non-essential persons keep a safe distance whilst the trolley is in use.
9
only place trolley under those lifting points recommended by vehicle manufacturer (see vehicle hand book).
9
check the lifting point is stable and correctly held in trolley supports.
9
ensure the trolley wheels are free to move and that there are no obstructions.
9
ensure you have a clear view and necessary assistance when transporting vehicle.
9
ensure there are no persons or obstructions beneath the vehicle before moving.
9
When stationary, always lock the brake wheels.
8
do not
operate the trolley if damaged.
8
do not
allow untrained persons to operate the trolley.
8
do not
exceed the rated capacity of the trolley.
WaRning! do not
use the trolley to hold and move a vehicle which is unstable.
8
do not
allow the vehicle to move on the trolley.
8
do not
move vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
8
do not
work under the vehicle unless supported by axle stands which have been correctly positioned.
8
do not
ride on the trolley.
8
do not
use the trolley without appropriate supports.
8
do not
use the trolley for purposes other than which it is intended.
9
When not in use store trolley in a safe, dry, childproof area.
2. intRoduction
Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. enables easy movement around workshop.
V-crutch supports adjustable for height and overall width. fitted with four Ø90mm locking nylon castors.
3. sPecification
moel no .................................................................... Vmd001
minimum Height ......................................................... 315mm
maximum Height ........................................................ 495mm
Height increments4X45mm ......................................4X45mm
minimum support Width ............................................. 350mm
maximum support Width .......................................... 1450mm
Width ........................................................................ 1500mm
capacity ....................................................................... 900kg
Vmd001 | issue 1 15/09/16
Original Language Version
© Jack sealey limited
refer to
instructions
Wear safety
footwear
