VS862 - 2 - 151107
12
≤ V2.4 SOFTWARE
Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes may allow the scan tool
to delete not only the codes from the vehicle’s on-board computer, but also
“Freeze Frame” data and manufacturer specific enhanced data. Further, the
I/M Readiness Monitor Status for all vehicle monitors is reset to Fail status.
Do not erase the codes before the system has been checked completely by a
technician.
If you decide to erase the DTCs, use the
1)
UP/DOWN
scroll buttons to
select
Erase Codes
from
Select Function
menu and press the
Y
button.
If the scan tool is not connected or no communication is established
y
with the vehicle yet, then refer to
Reading Codes
from 1 to 7 at
Paragraph 3.1.
A warning message comes up asking for your confirmation.
2)
If you do not want to proceed with erasing the codes, press the
3)
N
button to
exit. A message of
“command cancelled”
will show up.
If you do wish to proceed to erase the codes, then press the
4)
Y
button.
Select Function
1) Read Codes
►2) Erase Codes
3) ECU Information
4) Readiness Test
Erase Codes
Erase Trouble Codes!
Are you sure?
<YES> NO
