5. operation
warning!
Not for use with petrol or volatile liquids within flash point range -20
o
c to +80
o
c
warning!
damage will occur if the pump is run dry. only for use when submerged in liquid.
important!
ensure polarity and voltage (24Vdc) are correct before use.
important!
motors damaged due to dry running, incorrect polarity and/or incorrect voltage will not be covered
under warranty.
5.1.
Prepare pump for use. Ensure that the impeller guard, filter and end cap are all in place and that the hose is firmly attached.
ensure the seal around the power cable is in place and that the seal cap is screwed tightly down.
important!
should any of the above items appear damaged or in some way malfunctioning
Do not attempt to
uSe tHe pump.
contact your authorised service agent for information and repairs.
5.2. submerge pump in liquid to be transferred.
5.3. Position stainless steel nozzle as required.
5.4. Attach battery clips to appropriate terminals - take great care and keep clips and battery well away from any liquids.
important!
Pump will deliver immediately - be sure to have the pump submerged and the hose correctly
positioned before battery clips are connected.
4.5.
should the pump’s performance deteriorate significantly during usage, remove battery clips from terminals and remove pump
from the liquid.
unscrew end cap and check that it is not blocked. Also check that the filter and impeller are not clogged.
remove any blockages, reassemble pump and continue use.
important! Do not
exceed 15 minutes continuous run time in every 30 minutes.
6. maintenance
6.1.
Unscrew the end cap for periodical cleaning of the filter. It is recommended that the filter be cleaned after use in particularly
viscous liquid, or where a significant amount of suspended matter was present in the liquid.
6.2.
check the impeller regularly for any build-up of foreign matter. clean if necessary.
Sealey group, Kempson way, Suffolk business park, bury St edmunds, Suffolk. ip32 7ar
01284 757500
01284 703534
www.sealey.co.uk
environment protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
weee regulationS
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. contact your local solid
waste authority for recycling information.
note
: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
tP9424.V2 issue 2 (Hf) 15/12/17
Original Language Version
© Jack sealey limited
