Original Language Version
TC965.V2 Issue No:
2 - 16/11/09
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
imPortAnt:
No liability is accepted for incorrect use of this product.
WArrAnty:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inFormAtion:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
5. mAintenAnce
01284 757500
www.sealey.co.uk
01284 703534
Sole U.K. Distributor Sealey Group
Kempson Way, suffolk Business Park
Bury st. Edmunds suffolk.
IP32 7Ar
Web
fig.12
fig.13
4.3
tyre fitting
4.3.1 Lubricate both tyre beads with an approved rubber lubricant.
4.3.2 Mount and lock the wheel to the stand as shown in fig.12.
4.3.3 Place the lower bead of the tyre over the wheel rim and using the flat-end of the tyre bar place the ball end between the bead and the
rim with the flat side of the tyre bar against the centre post rotate the tool full circle (fig.13).
4.3.4 fit a tube if appropriate and then seat the upper bead in the same manner.
4.3.5 refit valve core, remove wheel from the tyre changer and inflate to seat the beads. Adjust the tyre pressure to manufacturers
specifications.
note: if the tyre has been fitted with an inner tube take care not to trap the tube between the tyre and the wheel rim when bead
seating.
5.1
Every month lubricate the threaded bar with grease.
5.2
Keep the tyre changer clean, use water and a mild detergent.
5.3
Check the tyre changer and components for damage or wear and replace parts if
damaged.
