MV VOLTAGE MEASUREMENTS
CAUTION:
Do not measure mV voltages if a motor on the circuit
is being switched ON or OFF. Large voltage surges may occur
that can damage the meter.
1. Set the function switch to the green mV position.
2. Press the
MODE
button to indicate “
DC
”.or
““
AC
”, or in AC range press
EXIT
for two
seconds and chose ”AC+DC”
Insert the black test lead banana plug into
the negative
COM
jack.
Insert the red test lead banana plug into
the positive
V
jack.
3. Touch the black test probe tip to the
negative side of the circuit.
Touch the red test probe tip to the positive
side of the circuit.
4. Read the mV voltage in the display.