background image

3.  SpeCifiCAtiON

model no:

 ....................................................................

tA305

display: .............3 3/4-digit lCd, with a max. reading of 3999

negative Polarity Indication:

 ........... negative sign “ - “ shown on the display automatically

over Range Indication:  .................  ol shown on the display

Jaw opening Capability: .............................................. 10mm

max. measurable Conductor: ......................................  10mm

Battery:  ........................... 1.5V battery, AAA or equivalent x2

low Battery Indication: ......................... shown on the display

operation environment:  ................... o°C to 40°C, < 75%RH 

Storage environment: ....................... -10°C- 50°C, < 85%RH 

Size: ............................................................226 x 71 x 38mm

Weight:  .......................................... 185g (including batteries}

AC voltage

Input impedance:..........................................................

10MΩ

Frequency range: ............................................. 40Hz - 400Hz

max. allowable input voltage: ..................................600V rms

Response: ................ Average, calibrated in rms of sine wave

        Note: 

The 400.0mV range is available only in manual range mode.

      

 

       dC voltage

Input impedance:............................

range 400.0mV:> 100MΩ

 

 

 

 

for the other ranges: 10MΩ

max. allowable input voltage: 600V dC

AC current

display: .............................sine wave rms, average response

Frequency range: ....................................................50 ˜ 60Hz

max. allowable input current: ....................................AC100A

Response: ................ Average, calibrated in rms of sine wave

T

emperature coefficient:

 ......................... ±0.3% of reading/°C

dC current

max. allowable input current: ....................................dC100A

T

emperature coefficient:

 ......................... ±0.3% of reading/°C

Original Language Version

© Jack Sealey limited

TA305  Issue 3  (3) -  12/12/18

Summary of Contents for TA305






Reviews: