3. OPERATION
4. MAINTENANCE
5 . PARTS LIST & DIAGRAM
ITEM PART NO
DESCRIPTION
ITEM PART NO
DESCRIPTION
1 stF29t.01 Front base plate
25 stF29t.25
Fan motor
2 stF29t.02
Washer
26 stF29t.26 screw
3 stF29t.03 rear base plate
27 stF29t.27
Hurricane blade case
4 stF29t.04 swing motor
28 stF29t.28
Hurricane blade
5 stF29t.05 swing motor bracket
29 stF29t.29
Balancing weight
6 stF29t.06 small crank
30 stF29t.30 rear housing
7 stF29t.07
Link rod
31 stF29t.31
Front housing
8 stF29t.08
Big crank
32 stF29t.32
Front grille
9 stF29t.09 swinger bracket
33 stF29t.33 shaft bracket
10 stF29t.10 t-busher
34 stF29t.34 oscillating switch
11 stF29t.11 cable clamp
35 stF29t.35 timer
12 stF29t.12 terminal block
36 stF29t.36 timer switch knob
13 stF29t.13 terminal block cover
37 stF29t.37 selector switch
14 stF29t.14 spring washer
38 stF29t.38 right hinge bracket
15 stF29t.15
Washer
39 stF29t.39
Left hinge bracket
16 stF29t.16 rod
40 stF29t.40 switch housing
17 stF29t.17
Fix plate
41 stF29t.41
Panel plate
18 stF29t.18 spring washer
42 stF29t.42
Airflow stopper
19 stF29t.19 nut
43 stF29t.43 screw
21 stF29t.21 capacitor
44 stF29t.44 screw
22 stF29t.22 shielding cap
45 stF29t.45 swing bracket cover
23 stF29t.23
Left motor mounting bracket
24 stF29t.24 right motor mounting bracket
Issue : 1
Date: 100103
3.1 Do not operate the fan without the base attached. Do not operate the fan lying on its side.
3.2 Place the fan in the area where it is to be used using the recessed carrying handle at the
back of the unit and plug it into the mains supply.
3.3
Turning on and selecting a speed.
to operate the fan you must turn the rotary timer
switch (fig3-A) to the “on” position even if you do not intend to use the timer. the fan will
come on when you select a speed by using one of the three push buttons. no.1 is low
speed ; no.2 is medium and no.3 is high speed. to turn the fan off press the “0” button.
3.4
Oscillation.
During use the fan can be made to turn from side to side. to commence
oscillation push the oscillation button down (fig3-B). to stop oscillation push the button so
that it comes up again into its off position.
3.5
Timer.
the rotary timer control allows you to set a fixed operation time for the unit of up to
two hours. turn the timer knob clockwise until it points to the desired number of minutes
you wish the fan to run. now select the fan speed and the unit will come on and run for
the period of time that you have set.
4.1 If any problems are experienced with the unit take it to an authorised service centre for repair or maintenance. Do not attempt to service
the unit yourself. this can only be done by an authorised service agent such as your local sealey dealer or any agent qualified to
undertake electrical repairs.
4.2 If the unit requires external cleaning make sure it is switched off and unplugged from the mains supply. use a soft tissue or cloth for
general cleaning. to remove more persistent dirt or grime wipe down with a cloth that has been dampened with warm soapy water. Do
not use any solvents ( such as thinners ) as these may damage the plastic casing.
fig 3
A
B
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
no liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
stF29t Issue: 3 - 14/04/10
