5. asseMBLy
5.1.
attach Broadcast Bracket to tank (see fig.1)
5.1.1.
ensure the bracket is fixed with the two clips at the end facing the pump.
5.2.
remove spot sprayer Hose from pump (see fig.2)
5.2.1.
loosen the hose clamp connecting the hose to the pump.
5.2.2.
Pull the hose off of the pump.
5.3.
assemble Broadcast Kit. (see fig.3)
5.3.1.
Insert the broadcast lance into the bracket, note the orientation in fig.3.
5.3.2.
Slide two hose clamps over the hose.
5.3.3.
Push the hose onto the hose barb on the broadcast lance and onto the connector on the pump.
5.3.4.
Slide the hose clamp around the hose barbs and tighten.
note! refer to the manual for ss37 for the rest of the assembly procedure and preparation.
fig.1
fig.2
fig.3
SSA2 Issue 3 (HF) 06/11/18
Original Language Version
© Jack Sealey limited