6.3.
dEFinition oF ‘inSPECtion’ and ‘EXaMination’ bEloW.
inSPECtion:
Inspect the crane for defects and check the operation of controls, limiting and indicating devices without loading the crane. This check
does not normally require any part of the crane to be dismantled other than removal or opening of covers or housings.
EXaMination:
Verification that the crane can safely continue in service including a functional test of all safety devices i.e. limiting, indicating
equipment, brakes, clutches, safety valves etc to verify that they operate within the required tolerances. An examination is
more thorough than an inspection.
6.4.
daMagEd CranES.
Any crane which appears to be damaged, badly worn, or operates abnormally
MuSt bE rEMoVEd FroM SErViCE!
It is
recommended that necessary repairs be made by an authorised service agent.
Sealey group, Kempson Way, Suffolk business Park, bury St Edmunds, Suffolk. iP32 7ar
01284 757500
01284 703534
www.sealey.co.uk
EnVironMEnt ProtECtion
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
SPC1000 Issue 4 (HF) 02/11/18
Original Language Version
© Jack Sealey limited
