background image

FULLY AUTOMATIC BATTERY CHARGER

MODEL NO: 

SPBC8, SPBC12 & SPBC16

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

1.1. 

  

ELECTRICAL SAFETY

 

‰

  

WARNING!

 It is the user’s responsibility to check the following:

 

Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and    

 

all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical  

 

products. You may obtain an RCD by contacting your local Sealey Stockist. 

 

If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable  

 

 

Appliance Test) tested.

 

Electrical safety information, it is important that the following information is read and understood.

1.1.1.   

Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. 

1.1.2.   

Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.

1.1.3. 

  

Important

: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the    

 

correct fuse - see fuse rating in these instructions.

 

8

   DO  NOT

 pull or carry the appliance by the power cable.

 

8

  

DO NOT

 pull the plug from the socket by the cable. Remove the plug from the socket by maintaining a firm grip on the plug.

 

8

   DO  NOT

 use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or replaced immediately by a   

  qualified electrician.

1.1.4. 

  

This product is fitted with a BS1363/A 13 Amp 3 pin plug. 

 

If the cable or plug is damaged during use, switch the electricity supply and remove from use. 

 

Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a qualified electrician.

 

Class II products are wired with live (brown) and neutral (blue) only, and are marked with the 

 

Class II symbol;

 

A) Connect the BROWN live wire to the live terminal ‘L’.

 

B) Connect the BLUE neutral wire to the neutral terminal ‘N’.

 

C) After wiring, check that there are no bare wires and ensure that all wires have been correctly 

 connected. 

 

Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. 

 

8

   DO  NOT 

connect either wire to the earth terminal. 

 

Sealey recommend that repairs are carried out by a qualified electrician. 

1.2.    

GENERAL  SAFETY

 

 

  DANGER! BE AWARE, LEAD-ACID BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY  

 

  OPERATION. FOR THIS REASON, IT IS VERY IMPORTANT TO READ AND FOLLOW THESE INSTRUCTIONS  

 

  CAREFULLY, EACH TIME YOU USE THE CHARGING EQUIPMENT.

 

9

   Follow these instructions and those published by the battery and vehicle manufacturer, and the maker of any equipment you intend  

  to use in the vicinity of the battery. Remember to review warning marks on all products and on engines.

 

‰

  

WARNING!

 Modern vehicles contain extensive electronic systems. 

  You are required to check with the vehicle manufacturer, for any specific instructions regarding the use of this type of equipment on  

  each vehicle.

 

9

   No liability will be accepted for damage/ injury, where this product is not used in accordance with all instructions.

1.3.    

PERSONAL  PRECAUTIONS

 

9

   Ensure there is another person within hearing range of your voice and close enough to come to your aid, should a problem arise   

  when working near a lead-acid battery.

 

9

   Wear safety eye protection and protective clothing. Avoid touching eyes while working near battery.

 

9

   Have fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.

 

9

   Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush eye immediately with cool,  

  clean running water for at least 15 minutes and seek immediate medical attention.

 

9

   Remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit   

  current which is high enough to weld a ring or the like to metal, which would cause severe burns.

 

9

   Ensure hands, clothing (especially belts) are clear of fan blades and other moving or hot parts of engine, remove ties and contain  

  long hair.

 

8

  

DO NOT

 smoke or allow a spark or flame in the vicinity of battery or engine.

Recommended fuse rating

13 Amp

S

PBC8 SPBC12 SPBC16 Issue 1 22/01/2021

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

Electrical shock 

hazard

Indoor use only

Keep away 

from sources of 

ignition

Use in well 

ventilated areas

Keep in dry area 

protect from rain

Warning

 

Wear eye 

protection

Summary of Contents for SPBC8

Page 1: ...A Connect the BROWN live wire to the live terminal L B Connect the BLUE neutral wire to the neutral terminal N C After wiring check that there are no bare wires and ensure that all wires have been correctly connected Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight 8 DO NOT connect either wire to the earth terminal Sealey recommend that repairs ...

Page 2: ...en not in use store the charger carefully in a safe dry childproof location 9 An extension cord should not be used unless absolutely necessary Use of an improper extension cord could result in a risk of fire and electric shock If an extension cord must be used make sure That the pins on the plug of the extension cord are the same number size and shape as those of the plug on the charger That the e...

Page 3: ...est quality levels There are no buttons to decipher the specially designed microprocessor charging system automatically selects the correct voltage and current setting and output levels for the size and type of the battery greatly assisting prolonged battery life and user safety Please adhere to all safety directions in this manual and retain for later use 4 3 IMPORTANT SAFETY INSTRUCTIONS 4 3 1 B...

Page 4: ...n the product becomes completely unserviceable and requires disposal drain any fluids if applicable into approved containers and dispose of the product and fluids according to local regulations WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment WEEE When the product is no longer required it must b...

Reviews: