© Jack Sealey Ltd
3.3. GRINDING
3.3.1. Switch the machine on.
3.3.2. Insert the drill bit holder into the grinding location, ensuring that the lower lugs engage in the cut-outs (see fig.4).
3.3.3. Work the drill bit holder back and forth until the grinding sound diminishes.
3.3.4. Remove the drill bit holder and re-insert having turned through 180°.
3.3.5. Repeat step 3.3.3. When complete, the drill bit will be sharpened and ready for use.
4. MAINTENANCE
4.1
Before cleaning disconnect from the mains. Keep clean and free from oil and grease, store in dry conditions.
4.2.
Metal filings can be cleared by removing the cover as in fig.5 and emptying the contents.
4.3.
An internal fuse is fitted, accessed via the fuse holder next to the on/off switch.
DO NOT
replace with a fuse of a different rating.
fig.4
fig.5
01284 757500
01284 703534
Sole UK Distributor: Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
Original Language Version
SMS2008 Issue:2(I) - 21/10/14
